Incoforms · Incoforms Academy · International trade glossary · EN · FR · AR

Exporting Chemicals, Fertilisers and Plastics: SDS, REACH, IMDG

Export chemicals, fertilisers and plastics: GHS and CLP labels, 16-section SDS, REACH and only representatives, IMDG dangerous goods, fertiliser rules and CBAM.

Key takeaways

  • Chemicals are sold with a safety data sheet and hazard labels based on the UN GHS; each market applies its own version, such as CLP in the EU.
  • In the EU, every substance imported at 1 tonne a year or more must be registered under REACH, by the importer or by an only representative appointed by the non-EU manufacturer.
  • Hazardous chemicals are dangerous goods in transport: classify them, use UN-certified packaging, label and declare them under the IMDG Code for sea freight.
  • Fertilisers have their own rules: the EU Fertilising Products Regulation with contaminant limits such as cadmium, the IMSBC Code for bulk shipments and CBAM for nitrogen fertilisers.
  • Some chemicals are controlled as precursors or dual-use goods and need licences or pre-export notifications.

Chemicals, fertilisers and plastics are a large part of North Africa's non-energy exports. Algeria has about 3.6 million tonnes a year of granular urea capacity, at the AOA and Sorfert plants near Arzew, and exports most of it along with ammonia; Morocco's OCP is one of the world's largest exporters of phosphates and phosphate fertilisers; Tunisia and Egypt export phosphates, fertilisers and chemicals. Smaller producers export paints, detergents, cleaning products, PVC compounds and plastic packaging.

The sector has two features that set it apart. First, the product is defined by its hazards as much as by its specification: every market requires a safety data sheet, hazard labels and, often, registration of the substances before they can be sold. Second, many products are dangerous goods in transport, which changes packaging, documents, freight costs and the carriers that will accept them.

This lesson covers HS codes, hazard communication, REACH and similar regimes, transport of dangerous and bulk cargo, fertiliser rules, export controls, contracts, and a worked example of a container of solvent-based paint from Algeria to Dakar. Chemical regulations are detailed and change often: check each substance and market with a qualified regulatory adviser before you sell.

HS codes for chemicals, fertilisers and plastics

ProductHS code
Natural calcium phosphates (phosphate rock)2510
Phosphoric acid2809
Ammonia2814
Urea3102.10
Ammonium nitrate3102.30
Diammonium phosphate (DAP)3105.30
Paints and varnishes (non-aqueous / aqueous)3208 / 3209
Detergents and cleaning preparations3402
Polyethylene, polypropylene, PVC in primary forms3901, 3902, 3904
Plastic packaging (bottles, sacks, boxes)3923

Chemical classification depends on purity and composition: a mixture can fall in a different heading from its main ingredient. See HS codes.

Hazard communication: GHS, labels and the SDS

The UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS) sets common criteria for classifying hazards and common label elements: pictograms, signal words ("Danger", "Warning"), hazard statements and precautionary statements. Each country adopts it in its own way and its own edition:

  • EU: the CLP Regulation (EC) No 1272/2008. It was revised by Regulation (EU) 2024/2865, and the new label formatting rules (minimum font sizes and layout) were postponed to 1 January 2028 by Regulation (EU) 2025/2439. Hazardous mixtures sold in the EU also need a unique formula identifier (UFI) on the label and a notification to poison centres.
  • United States: OSHA's Hazard Communication Standard, aligned on the GHS.
  • Other markets: GHS-based rules with national variations in Gulf countries, Asia and Africa.

The safety data sheet (SDS) has 16 standard sections, from identification and hazards to transport and regulatory information. In the EU, its content follows Annex II of REACH as amended by Regulation (EU) 2020/878, and it must be supplied in the official language of the member state. Keep the SDS consistent with the label and the transport classification: inspectors and carriers compare them.

REACH and similar registration regimes

The EU's REACH Regulation (EC) No 1907/2006 works on the principle "no data, no market": each substance manufactured in or imported into the EU at 1 tonne or more per year must be registered with the European Chemicals Agency, with a dossier whose data requirements rise with tonnage.

For an exporter, the key points are:

  1. Who registers. The EU importer, unless you appoint an only representative (OR) established in the EU under Article 8. The OR registers on your behalf and your importers become downstream users. This keeps your recipe confidential and lets you sell to several importers.
  2. Mixtures. It is each substance in the mixture that is registered, not the mixture.
  3. Polymers are exempt from registration, but their monomers and some other substances must be registered when the conditions are met.
  4. Restrictions and authorisation. Annex XVII restricts certain substances in products; substances of very high concern may require authorisation, and articles containing more than 0.1% of a candidate-list substance trigger information duties.

The UK, Turkey and South Korea run their own REACH-type regimes, so an EU registration does not cover them.

Transporting dangerous goods

Hazardous chemicals are dangerous goods. Sea transport follows the IMDG Code, road the ADR agreement in Europe and many neighbouring countries, air the IATA Dangerous Goods Regulations. The shipper must classify the product (UN number, proper shipping name, class, packing group), pack it in UN-certified packaging tested for that packing group, mark and label each package, placard the container, segregate incompatible goods, and give the carrier a dangerous goods declaration and a container packing certificate.

ProductUN number and class (examples)
Paint, flammableUN 1263, class 3
Ammonia, anhydrousUN 1005, class 2.3 (toxic gas, corrosive)
Hydrochloric acidUN 1789, class 8
Ammonium nitrate based fertiliserUN 2067, class 5.1
Urea, polyethylene pelletsNot classified as dangerous goods

Carriers, ports and transshipment hubs can add their own restrictions and surcharges, and some refuse certain classes. Confirm acceptance and the dangerous goods surcharge before quoting. The basics are covered in dangerous goods.

Bulk solids follow the IMSBC Code, which sorts cargoes into Group A (may liquefy), Group B (chemical hazard) and Group C (neither): urea is Group C, ammonium nitrate based fertilisers are Group B. Liquids in bulk travel in ISO tanks, flexitanks for non-hazardous products, or chemical tankers.

Fertilisers: specific rules

  • EU Fertilising Products Regulation (EU) 2019/1009. CE-marked fertilising products must meet composition, labelling and contaminant limits, such as 60 mg of cadmium per kg of P2O5 for inorganic macronutrient fertilisers. Products may still be sold under national rules in a member state instead of the CE marking. High-nitrogen ammonium nitrate fertilisers must pass a detonation resistance test.
  • CBAM. Nitrogen fertilisers (ammonia, urea, nitric acid, ammonium nitrate and mixed nitrogen fertilisers) are covered by the EU's Carbon Border Adjustment Mechanism, in its definitive period since 1 January 2026; EU importers will ask for your verified emissions data.
  • Quality specification. Urea is typically sold on nitrogen content (46% minimum), biuret (1% maximum), moisture and granule size, with independent sampling and a draft survey at loading.

Export controls and precursors

Some chemicals are controlled because they can be used to make chemical weapons or drugs. Substances on the schedules of the Chemical Weapons Convention, chemicals on dual-use lists and drug precursors may need an export licence, an import permit in the destination or a pre-export notification. Check your products against the lists before you quote; see export controls and sanctions and dual-use goods.

Contracts, documents and certifications

A chemical sale should define the product by its specification (guaranteed minimum or maximum values, not "typical" values), the test methods, a certificate of analysis per batch, the packaging (UN-certified drums, IBCs, bags, bulk), shelf life where relevant, and how quality claims are settled. Buyers commonly ask for ISO 9001 and ISO 14001, and for plastics intended for food contact, a declaration of compliance with the EU rules on plastic food-contact materials (Regulation (EU) No 10/2011). Packaging placed on the EU market must also meet the Packaging and Packaging Waste Regulation (EU) 2025/40, which applies since 12 August 2026. For packing and marking, see export packaging and marking.

Worked example: solvent-based paint from Algeria to Dakar

An Algerian paint manufacturer sells solvent-based enamel paint to a Senegalese distributor. All figures are illustrative.

Product and classification. According to its SDS, the paint is UN 1263, Paint, class 3, packing group III. It is packed in 20-litre UN-certified steel pails with GHS labels in French, the language of the market, and transport labels and marks. Quantity: 800 pails, 16,000 litres, about 17.5 tonnes gross in one 20' container, placarded class 3.

Contract. EUR 3.10 per litre CFR Dakar, total EUR 49,600; 30% advance, 70% by documentary collection. Documents: invoice, packing list, bill of lading, certificate of origin, SDS, certificate of analysis per batch, and the dangerous goods declaration and container packing certificate given to the line.

ItemEUR (illustrative)
Sale, 16,000 litres at EUR 3.10 CFR Dakar49,600
Production cost, including pails and labels38,000
Dangerous goods documentation and trained packing staff400
Inland transport and port charges, including dangerous goods handling900
Ocean freight, 20' container, with dangerous goods surcharge2,100
Insurance, bank charges, certificates650
Total costs42,050
Gross margin7,550 (about 15%)

Common mistakes in chemical exports

  • Declaring a hazardous product as general cargo to save on freight: illegal, dangerous and uninsurable.
  • Using packaging that is not UN-certified for the product's packing group.
  • Shipping to the EU before REACH registration is in place.
  • Supplying an SDS in the wrong language or format for the market.
  • Selling on "typical" values instead of guaranteed specifications.
  • Ignoring precursor and dual-use controls on ordinary-looking chemicals.

Frequently asked questions

Does a non-EU manufacturer need to register chemicals under REACH?

The legal obligation lies with the EU importer for each substance imported at 1 tonne or more per year. A non-EU manufacturer can instead appoint an only representative established in the EU under Article 8 of REACH, who registers on its behalf; the importers then become downstream users. Exporters often do this to keep control of their data and to sell to several importers.

What are the 16 sections of a safety data sheet?

Identification; hazards identification; composition; first-aid measures; fire-fighting measures; accidental release measures; handling and storage; exposure controls and personal protection; physical and chemical properties; stability and reactivity; toxicological information; ecological information; disposal considerations; transport information; regulatory information; and other information. In the EU, the format and content follow Annex II of REACH as amended by Regulation (EU) 2020/878.

Is urea a dangerous good for shipping?

Urea is not classified as a dangerous good under the IMDG Code. Shipped in bulk, it is listed in the IMSBC Code as a Group C cargo, neither liable to liquefy nor possessing a chemical hazard, but it is hygroscopic and must be kept dry to avoid caking. Ammonium nitrate based fertilisers, by contrast, can be class 5.1 dangerous goods (UN 2067).

Do plastic resins need REACH registration?

Polymers themselves are exempt from registration under REACH, but the monomers and other substances used to make them must be registered when they meet the conditions set by the regulation, and additives in the resin may need registration too. Food-contact plastics must also comply with the EU rules on plastic materials in contact with food.